X-Print® - Wash&Cure „2 in 1"

2 in 1 Smart Design: The device supports washing and curing models in a machine to make the reprinting process much cleaner and easier. Replace the original multi-machine operation with just one machine to save more space and keep the work area cleaner.

2 washing modes: you can put the parts in a metal basket for washing if you have already removed models from the building board. Or simply mount the building board to avoid exposure to resin. The building board holders are designed to fit most resin printer models.

Effective curing mode: built-in UV light at 356nm and 405nm to produce uniform light intensity and make curing more thoroughly. The curing platform is rotated 360 degrees to cure each piece completely.

3 timing modes: timer settings for 2 minutes / 4 minutes / 6 minutes for better washing and curing each layer of the 3D printer model according to your DIY requirements. In the middle of the cycle, the direction of movement is changed to ensure that the shape of the pressure does not limit where the cleaning concentrates.

SAFE DESIGN: The top PC cover can block 99.95% UV light, and the UV light set will turn off automatically to ensure safety once the top cover is removed.

X-Print® "wash&cure" / Technical specifications:
UV light source 405 nm (8 pieces) + 365 nm (8 pieces)
Volume cleaning container 115mm x 65mm x 165mm
Volume light hardness area 140mm (diameter) x 165mm (height)
Device dimensions 225mm x 220mm x 378mm Rated power 40W
Input voltage AC110/220, 50/60Hz
Weight 6 kg

Manufacturer: X-Depot