xMILL E4

xMILL E4

Areas of application:

• Wet/Dry Machining

Materials:

• Composites, plastic/wax, glass ceramics, zirconia
• Blocks up to 45 × 20 × 20 mm

Indications:

• Crowns, bridges, inlays, onlays, veneers, zirconium abutments, screw-retained crowns

Mounting systems:

• integrated block holder

Base System:

• stable welded aluminum construction
• 4 axes
• Linear axes X/Y/Z axis (precision ball screw drives · motors with resolution < 1 μm · ground precision guides made of high-alloy steel · repeatability ± 0.003 mm)
• Axis of rotation A with a rotation angle: +190° to -10°
• Workspace backlit by RGB LED lighting with status display

High Frequency Spindle:

• High-frequency spindle with electromechanical tool change
• Speed up to 60,000 rpm
• Output power (Pmax): 800 watts peak power (S6): 400 watts continuous power (S1): 300 watts
• 2-way hybrid ceramic ball bearings
• for tools with 3 mm shank diameter and max. 40 mm overall length

Automation:

• Removable tool magazine for 6 tools with additional single space for an AIRTOOL
• Length measurement and tool breakage control via precision measuring probe
• Slide the coolant container or (optional) drying container directly into the compartment directly under the work area
• Access via work area door, safety interlocked

Editing modes:

• Dry: Compressed air-free operation by using AIRTOOLs - optional drying container required
• Wet: 2 liquid nozzles on the spindle · integrated reservoir for coolant · PUREWATER Technology: no abrasive additives required
• Hose connection for external vacuum cleaner on the rear wall of the housing
• 24 V switching output for controlling suction units

Dimensions & Weights:

• Dimensions (W/D/H): 360 × 370 × 490 mm with the door closed · 360 × 420 × 490 mm with the door open
• Foot spacing: (W/D) 270 × 268 mm
• Weight: 28 kg

Scope of delivery:

• DENTALCAM software included
• Accessories: Spindle service set Calibration set including micrometer Tool magazine insert (1 piece) Torx screwdriver set
  Torque screwdriver 1.5 Nm AIRTOOL for PMMA/wax Drill (tool positions) Cleaning brush
  and microfiber cloth · TecPowder (3) · foam filter · power cord · Ethernet network cable