Post-exposure device - OTOFLASH 100
The light-curing device for rapid and reliable light-curing of VarseoWax and VarseoSmile resins.
Two flashlight bulbs shining from below into the polymerization Chamber and hence makes short resin light-curing times possible
Wide wavelength field ensures very good resin hardening and hence achievement of the final physical characteristics of the printed objects
Protective gas equipment prevents oxygen inhibition, guarantees completely adhesive-free surface curing and hence efficient reduction of the residual monomer content and biocompatibility
Device can be used for photopolymerization of all materials that harden under light at wavelengths between 300 to 700 nm
- Nominal voltage: 100, 115, 230 VAC, 50/60
- Power consumption: approx. 250 W
- Flash frequency: 10 flashes a second
- Size of the polymerisation space: approx. 120 × 120 × 50 mm
- Spectral distributiong: 300 – 700 nm
- Dimensions (L × W × H): approx. 310 × 310 × 140 mm
- Weight: approx. 6 kg
- Gas pressure: 1.0 – 1,2 bar
- Gas type: Nitrogen N 2 / 2.6
- Gas flow: approx. 10 l / min
Datenblatt
- Produkttyp
- Serien