Diameter (D): 2.50 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 10.00 mm
Total length (LF): 45.00 mm
Radius (R): 1.25 mm
Cutting edges (Z): 2
Material:
Ti
Diameter (D): 2.50 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 10.00 mm
Total length (LF): 45.00 mm
Radius (R): 1.25 mm
Cutting edges (Z): 2
Material:
CoCr
Diameter (D): 2.00 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 10.00 mm
Total length (LF): 45.00 mm
Radius (R): 1.00 mm
Cutting edges (Z): 2
Material:
CoCr | Ti
Diameter (D): 1.50 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 10.00 mm
Total length (LF): 45.00 mm
Radius (R): 0.75 mm
Cutting edges (Z): 2
Material:
CoCr | Ti
Diameter (D): 1.50 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 12.00 mm
Total length (LF): 50.00 mm
Radius (R): 0.20 mm
Cutting edges (Z): 2
Material:
CoCr | Ti
Diameter (D): 1.50 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 16.00 mm
Total length (LF): 50.00 mm
Radius (R): 0.20 mm
Cutting edges (Z): 2
Material:
CoCr | Ti
Diameter (D): 1.00 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 8.00 mm
Total length (LF): 50.00 mm
Radius (R): 0.50 mm
Cutting edges (Z): 2
Material:
CoCr | Ti
Diameter (D): 2.00 mm
Shank diameter (D): 4.00 mm
Neck length (L1): 8.00 mm
Total length (LF): 40.00 mm
Radius (R): /
Cutting edges (Z): 4
Material:
CoCr | Ti
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 2 mm
Neck length (L1): 12 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.5 mm
Shank length (L1): 12 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.5 mm
Neck length (L1): 16 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1 mm
Neck length (L1): 8 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 0.6 mm
Neck length (L1): 4 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 0.5 mm
Neck length (L1): 3 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.5 mm
Neck length (L1): 12 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1 mm
Neck length (L1): 8 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.4 mm
Neck length (L1): 8 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.5 mm
Neck length (L1): 16 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 2.5 mm
Neck length (L1): 12 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.65 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): 1.85 mm
TiSi+ coating: maximum productivity when milling CoCr and titanium
Diameter (D): M2 1.6 mm
Deutsch