xMILL E5
Thanks to the lack of compressed air, you can enjoy maximum freedom when choosing the installation site and also benefit from extremely low operating costs. The open system architecture of the E5 makes it easy for you to get started with the digital production of dental restorations and it fits perfectly into your work processes. You can start right away with the CAM software supplied!
Plug & Mill: Unpack, switch on, start milling!
xMILL E5
Areas of application:
- Dry processing
Materials:
- Composites, plastic/wax, zircon, CoCr sintered metal
- Rounds, thickness 10-40 mm, diameter 98.5 mm
- Blocks up to 40 × 20 × 20 mm (requires block holder)
Indications:
- Crowns, bridges, inlays, onlays, veneers, bite splints, full dentures, denture frameworks, implant bars, abutments, screwed
crowns, screwed bridges, drilling templates, primary crowns, secondary crowns, model plates, model teeth
Mounting systems:
- Holder for 98.5 mm rounds (integrated) · Holder for 110 mm rounds (optional) · Block holder (optional) · Ivotion1 accessory kit
(optional)
Base System:
- 5-axis simultaneous control electronics with continuous trajectory and dynamic precalculation
- Machine bed made of solid cast aluminum
- Linear axes X/Y/Z axis (precision ball screw drives · motors with resolution < 1 μm · ground precision guides made of high-alloy steel · repeatability ± 0.003 mm)
- Axis of rotation A (backlash-free tension shaft gear with the highest angular accuracy · angle of rotation: 360°, infinite)
- Axis of rotation B (backlash-free tension shaft gear with the highest angular accuracy · angle of rotation: ± 35°)
- RGB LED lighting with status display
High Frequency Spindle:
- High-frequency spindle with electromechanical tool change
- Speed up to 60,000 rpm
- Output power (Pmax): 800 watts peak power (S6): 400 watts continuous power (S1): 300 watts
- 2-way hybrid ceramic ball bearings
- for tools with 3 mm shank diameter and max. 40 mm overall length
Automation:
- Tool magazine for 16 tools with separate space for an AIRTOOL
- Length measurement and tool breakage control via precision measuring probe
- Access via work area door, safety interlocked
Editing modes:
- Dry: Operation without compressed air by using AIRTOOLs
- Hose connection for external vacuum cleaner on the rear wall of the housing
- 24 V switching output for controlling suction units
Dimensions & Weights:
- Dimensions (W/D/H): 472 × 484 × 734 mm with the door closed | 472 × 567 × 734 mm with the door open
- Foot spacing: (W/D) 387 × 370 mm
- Weight: 43 kg
Scope of delivery:
- DENTALCAM software included
- Holder systems: abutment holders for various systems (optional)
- Accessories: Spindle service set Calibration set including micrometer Tool magazine insert (1 piece) Torx screwdriver set Torque screwdriver 1.5 Nm AIRTOOL for PMMA/wax Drill (tool positions) Cleaning brush and microfibre cloth Administrated Tool Board (ATB) for tool storage · Power cord · Ethernet network cable
Datenblatt
- Produkttyp
- Serien